DeVille DTS V8-4.6L VIN 9 (2002)
Wheel Bearing: Service and Repair
Front Suspension
With RPO FE1 and FE3
Wheel Bearing/Hub Replacement Front (FE1, FE3)
^
Tools Required
-
J 28733-B Front/Rear Spindle Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Insert a large flat bladed tool (1) into the caliper and rotor to prevent the rotor from turning.
4. Remove the wheel drive shaft nut.
5. Remove the rotor.
6. Disconnect the front wheel speed sensor connector and unclip from the dust shield.
7. Remove the wheel bearing and hub retaining bolts.