DeVille DTS V8-4.6L VIN 9 (2002)
4. Install the engine to transaxle bolt (2).
^
Tighten the bolt to 75 Nm (55 ft. lbs.).
5. Connect the vehicle speed sensor electrical connector.
6. Install the engine to transaxle center brace and heat shield.
7. Install the bolts securing the front transaxle brace to the transaxle.
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
8. Raise the transaxle and install the nut (1) securing the transaxle mount to the transaxle mount bracket.
^
Tighten the nut to 75 Nm (55 ft. lbs.).
9. Remove the transmission jack and the J41160.