DTS V8-4.6L VIN Y (2006)
9.
While inserting the DET, it will stop halfway down. Use a small pick to move the terminal locking tab aside which will allow the DET to fully
seat. The illustration shows a pick being used to move the locking tab aside.
10.
The DET will have a firm fit and must be inserted with care to ensure that the terminals are not bent. The illustration above shows how the DET
will look when properly installed in the rear fuse block.
11.
Install the gray fuse retainer. Realign the fuses as needed. Make sure all four locking tabs are secure.
