Escalade V8-5.7L VIN R (2000)
17. If installing a new non encapsulated window:
1. Use a new dauber, to apply the stationary window prep ( clear #3) approximately 10 mm to 16 mm (3/8 in. to 5/8 in). around the entire
perimeter of the window inner surface.
2. Apply stationary window prep (clear #1) to any exposed edges of the window.
3. Wipe the glass primed area immediately with a clean lint free cloth.
4. Shake the glass primer (black #2) for at least one minute.
18. If installing a new encapsulated window:
Use a new dauber, in order to apply the window prep (clear #2) to the area approximately 10 mm to 16 mm (3/8 in to 5/8 in). around the entire
perimeter of the glass inner surface of the primer/bonding areas). The primer is good up to 8 hours after applying it to the glass. The primed
surface of the glass must be kept clean.
19. Allow the glass primer to dry for approximately 10 minutes.
20. Shake the stationary window primer (#2 black) well.
1. Use a new dauber in order to apply the stationary window primer (black #2) to the areas of the stationary window (1) to which prep (clear #1)
was applied.
2. Allow the primer to dry for approximately 10 minutes.
Caution: Refer to Glass and Sheet Metal Handling Caution in Service Precautions.
Caution: Refer to Window Retention Caution in Service Precautions.
21. If using the short method, cut the tip of the applicator nozzle in order to provide a bead of 6.0 mm (1/4 in).
