Fleetwood FWD V8-252 4.1L (1986)
Tools Required:
J-3289-20
Holding Fixture
J-34013
Spring Compressor
J-34013-20
Clamp
J-34013-38
Guiding Rod
NOTICE:
Care should be taken to avoid chipping or cracking the spring coating when handling the front suspension coil spring. Damage to the coating
could result in spring failure.
Figure 3 - Strut Compressor
1.
Install strut compressor tool J-34013 in Holding Fixture J-3289-20 as shown in Figure 3.
2.
Install strut assembly in tool J-34013 as shown in Figure 3.
3.
Turn compressor forcing screw until spring compresses slightly.