Fleetwood FWD V8-273 4.5L (1988)
FIGURE 3 - SEAL STRIP INSTALLATION
10.
On DeVilles and Fleetwoods apply insulation strip, P/N 25540623, along lower inboard edge of glass so as to allow 12-15 mm of glass clearance
from edge of glass to bottom edge of insulation strip. Refer to Figure 3.
On Eldorados and Sevilles apply insulation strip, P/N 20375201, along lower inboard edge of glass so as to allow 32-34 mm of glass clearance
from edge of glass to bottom edge of insulation strip. Refer to Figure 3.
Parts are expected to be available on November 7, 1988. Until then, normal part orders will not be accepted by GMSPO. Only verifiable emergency VIP
orders will be accepted. SPO will make every effort to obtain parts. All parts will be placed on 400 control to waive VIP surcharges. However, the part
will be shipped premium transportation at dealer's expense. All other order types will be cancelled as incorrectly ordered while the 400 control is in
place.
FIGURE 4 - APPLYING URETHANE
