Fleetwood FWD V8-300 4.9L (1993)
CAUTION: The ISC motor is calibrated at the factory and NO ATTEMPT should be made to disassemble the unit. DO NOT IMMERSE THE ISC IN
ANY TYPE OF CLEANER AND ALWAYS REMOVE BEFORE THROTTLE BODY CLEANING AND SERVICING of components. Immersion in
cleaner will damage the ISC unit.
INSTALLATION:
1.
Connect the ISC jumper harness to the ISC assembly.
2.
Position the ISC to the throttle body.
3.
Install the ISC attaching screws.
4.
Connect the electrical connector at the jumper harness.
5.
Adjust the ISC motor.
