SRX 2WD V8-4.6L VIN A (2004)
Water Pump: Service and Repair
Water Pump Replacement - Auxiliary
Water Pump Replacement - Auxiliary (4.6L (LH2) w/RPOs V03/V92)
^
Tools Required
-
J 38185 Hose Clamp Pliers
Removal Procedure
1. Drain the coolant.
2. Using the J 38185 slide the hose clamp down on the hose (3).
3. Disconnect the hose from the auxiliary water pump.
4. Using the J 38185 slide the hose clamp back on the hose (1).
5. Disconnect the hose from the auxiliary water pump.
6. Disconnect the auxiliary water pump electrical connector.
7. Remove the auxiliary water pump nuts.
8. Remove the auxiliary water pump.
Installation Procedure