SRX 2WD V8-4.6L VIN A (2004)
1. Install the auxiliary water pump.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the auxiliary water pump nuts.
Tighten
Tighten the nuts to 9 Nm (80 lb in).
3. Connect the auxiliary water pump electrical connector.
4. Connect the hose (3) to the auxiliary water pump.
5. Using the J 38185 slide the hose clamp back into the original position on the hose.
6. Connect the hose (1) to the auxiliary water pump.
7. Using the J 38185 slide the hose clamp back to the original position on the hose.
8. Fill the coolant.