SRX 2WD V8-4.6L VIN A (2004)
6. Install the bolt securing the fuel filter bracket to the body.
Tighten
Tighten the fuel filter bracket bolt to 9 N.m (80 lb in).
7. Push upward in order to connect the fuel/brake bundle chassis pipe retainer to the underbody.
8. Complete the following in order to install the chassis hose/pipes to the retainers (2) located at the rearward portion of the rail:
8.1.
Install the chassis hose/pipes into the retainers (2).
8.2.
Close the retainers (2) at the top.
8.3.
Insert the retainers (2) into the rail.
9. Install the chassis hose/pipes into the retainers (1) located at the forward portion of the rail.
10. Close the retainers.
11. Push the locking mechanism (1) inward in order to engage the fuel/brake bundle chassis pipe retainers to the rail.