SRX 2WD V8-4.6L VIN A (2004)
1. With the aid from an assistant, position and secure the new rear frame (2) on the engine support fixture.
2. Install the following components to the rear frame assembly.
*
Differential Replacement () in Drive Axle
*
Brake Rotor Replacement - Rear () in Disc Brakes
*
Brake Caliper Replacement - Rear () in Disc Brakes
*
Stabilizer Shaft Link Replacement ()
*
Trailing Arm Replacement ()
*
Adjustment Link Replacement ()
*
Stabilizer Shaft Replacement ()
*
Park Brake Cable Replacement - Left Rear () or Park Brake Cable Replacement - Right Rear () in Park Brake
*
The rear brake pipes
*
Upper Control Arm Replacement ()
*
Lower Control Arm Replacement ()
*
Rear Position Sensor Replacement - Electronic Suspension () in Electronic Suspension Controls (ESC)
Important: The rear coil springs need to be indexed into the lower spring insulators prior to assembly.
3. Index the rear coil springs to the spring insulators.
Important: Ensure the intermediate brake cable is clear of the front frame to body mount prior to securing the frame bolts.
4. Ensure the intermediate park brake cable is positioned over left side frame assembly on the left side.
5. Lower the vehicle to the frame.
6. Position the coil springs (3) to the upper spring insulator (2).
7. Index the rear side frame mounts to the rear locator sleeves (1) located on the body.
8. Lower the vehicle until the frame mounts contact the body rail.
