SRX 2WD V8-4.6L VIN A (2004)
Front Subframe: Service and Repair
Frame Replacement - Front
Tools Required
*
J 24319-B Steering Linkage and Tie Rod Puller
*
J 39580 Engine Support Stand
*
J 43631 Ball Joint Remover
Removal Procedure
1. Install the engine support fixture.
2. Raise and support the vehicle. Refer to Vehicle Lifting ().
3. Remove the front wheels.
4. Remove the front air deflector.
5. Disconnect the wheel speed sensor harness connectors.
6. Disconnect the wheel speed sensor harness from the lower control arm.
7. Remove the outer tie rod to steering knuckle retaining nut.