SRX RWD V6-3.6L (2007)
4. Remove the garnish molding (1) carefully not to damage the speaker mounted behind the trim.
5. Slide the seat belt through the garnish molding.
Installation Procedure
1. Insert the seat belt through the garnish molding.
2. Insert the seat belt guide into the garnish molding.
3. Align the retainers on the garnish molding (1) with the holes in the body pillar.
4. Push the panel inward in order to secure the retainers.
5. Install the liftgate rod cover and liftgate rod.
Notice: Refer to Fastener Notice.
