SRX RWD V6-3.6L (2007)
Removal Procedure
1. Recover the refrigerant from the system. Refer to Refrigerant Recovery and Recharging.
2. Remove the air cleaner assembly.
3. Remove the surge tank.
4. Disconnect the electrical connector from the wiper motor.
5. Disconnect the engine harness electrical connector.
6. Remove the surge tank outlet hose bracket nuts from the cowl.
7. Reposition the surge tank outlet hose.
8. Remove the brake booster.
9. Raise and support the vehicle. Refer to Vehicle Lifting.
10. Remove the liquid line quick connect fitting from the condenser tube.
11. Disconnect the liquid line from the condenser tube.
12. Remove the liquid line quick connect fitting (1) from the evaporator.
13. Disconnect the liquid line from the evaporator.
14. Remove and discard the O-rings from the liquid line.
Installation Procedure
