SRX RWD V8-4.6L VIN A (2006)
1. Pry the rear of the shifter trim plate up with a blunt tool to release the trim from the console.
2. Pull upward on the trim plate.
3. Disconnect the traction control electrical connector.
4. Remove the trim plate.
Installation Procedure
1. Connect the traction control electrical connector.
2. Install the trim plate to the console with the front tabs.
3. Push down on the rear of the trim plate to lock it onto the console.
Trim Plate Replacement - Console Front
Trim Plate Replacement - Console Front
Removal Procedure
1. With a flat tool, pry on the top of the trim plate (1) in order to release the retainers.