SRX RWD V8-4.6L VIN A (2006)
Console: Procedures
Bracket Replacement - Console Floor
BRACKET REPLACEMENT - CONSOLE FLOOR
REMOVAL PROCEDURE
1. Remove the center console.
2. Remove the rear end panel.
3. Remove the 8 bolts securing the rear base bracket to the console.
INSTALLATION PROCEDURE
1. Locate the base bracket on the console.
2. Install the 8 bolts securing the rear base bracket to the console.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolts to 9 N.m (80 lb in).
3. Install the rear end panel.
4. Install the center console.
Center Console End Panel Replacement (With DVD)
CENTER CONSOLE END PANEL REPLACEMENT (W/ DVD)