SRX RWD V8-4.6L VIN A (2006)
4. Push the cable until the cable barrel is approximately 32 mm (1.25 in) from the end of the sunroof track from the rear.
5. Install the sunshade stop set-screw (3) flush to the front edge of the U-channel.
IMPORTANT: If the sunshade set screw is misadjusted or not installed in the track channel, the sunshade will not function properly. The
initialization process for the sunshade will not work.
6. Ensure that the sunshade is folded one-half turn over the sunshade channel.
7. Install the sunshade link (1) into the channel.
