SRX RWD V8-4.6L VIN A (2006)
8. Pull outward on the cable to remove the sunshade cable from the sunroof window front track assembly.
INSTALLATION PROCEDURE
1. Install the bullet end of the sunshade cable to the end of the U-channel (3). The U-channel is located on the front of the track assembly (2).
2. Push the cable into the U-channel until the barrel end of the cable reaches 25 mm (1 in) from the end of the U-channel.
3. Use a flat-bladed tool (3) to push the cable (2) through the channel.
