SRX RWD V8-4.6L VIN A (2006)
1. Install the engine oil pressure switch to the oil filter adapter.
Tighten the engine oil pressure switch to 16 Nm (12 ft. lbs.).
Notice: Refer to Component Fastener Tightening Notice in Service Precautions.
2. Install the new gasket.
3. Install the bolts attaching the oil filter adapter to the engine block.
Tighten the oil filter adapter bolts to 16 Nm (12 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.