STS RWD V8-4.6L (2007)
Lifter / Lash Adjuster: Service and Repair
Valve Lifter Replacement - Right Side
Valve Lifter Replacement - Right Side
Removal Procedure
1. Remove the right valve rocker arms.
Important: Ensure each camshaft follower remains matched to the original stationary hydraulic lash adjuster (SHLA) and original
location the components were assembled in.
2. Remove the SHLA from the right cylinder head bores.
3. Clean and inspect the valve lifters.
Installation Procedure
1. Ensure the crankshaft is in the top dead center (TDC) position for the number one cylinder.
Notice: Refer to Valve Lifter Priming Notice.
2. Fill the SHLA with clean engine oil. Refer to Sealers, Adhesives, and Lubricants for the correct part number. Take precautions to prevent
scratching the pivot sphere area (1) of the SHLA.
