STS RWD V8-4.6L (2007)
Engine Mount: Service and Repair
Engine Mount Bracket Replacement - Right
Engine Mount Bracket Replacement - Right Side (w/RWD)
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the right exhaust manifold.
3. Install a screw jack with a block of wood under the oil pan for support.
4. Remove the right engine mount upper retaining nut.
Important: Ensure not to distort or bend the engine mount heat shield.
5. Remove the right engine mount bracket mounting bolts.
6. Remove the engine mount bracket from the vehicle.
Installation Procedure
