STS RWD V8-4.6L (2007)
12. Install the J 28467-7A, as required, to lift the hook through the J 28467-6A lift hook bracket.
13. Install the 1/2 inch lift hook washer and the J 28467-34 lift hook wing nut onto the J 28467-7A lift hook.
14. Install the J 28467-6A (1) over the J 28467-16 (2).
15. Adjust the J 28467-6A bracket (1) in order to align the hook with the left J 28467-86.
16. Repeat the previous step for the right J 28467-15.
17. Install each J 28467-7A through each engine lift bracket and engine support adapter. Ensure that the hooks do not damage the surrounding
components.
18. Hand-tighten the J 28467-34 securely to remove all slack from the engine support fixture assembly.
19. The engine is now supported in vehicle to perform repairs that require front frame removal.