XLR V8-4.6L VIN A (2006)
1. Install the power window switch to the armrest switch plate applique. Push to engage the switch to the applique.
2. Connect the wire harness to the power window switch assembly.
3. Install the power window switch assembly into the pocket in the door trim panel.
4. Remove any protective tape.
5. Connect the wire harness to the door armrest assembly.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the armrest to the door trim panel. Secure the armrest with 4 retaining screws at the rear and 1 screw at the forward end of the armrest
assembly.
Tighten the screws to 10 N.m (89 lb in).