XLR V8-4.6L VIN A (2006)
7. Install the inner energy absorber to the door panel.
8. Install the upper trim to the door.
9. Install the retainers at the back of the door trim panel.
Tighten the retainers to 10 N.m (89 lb in).
10. Install the door trim panel.
Power Window Switch Replacement - Right Front
Power Window Switch Replacement - Right Front
Removal Procedure
Important: When removing the power window switch, place the ignition switch in the OFF position.
1. Remove the door trim panel.
2. Remove the retainer screws from the back of the upper trim panel.
3. Remove the upper trim from the door.
4. Remove the inner energy absorber from the door panel.
5. Remove 4 retaining screws from the rear of the armrest.
6. Remove 1 retaining screw from the forward end of the armrest assembly.