XLR V8-4.6L VIN A (2006)
9. Install the spring clip (1) to the hydraulic cylinder retainer pin.
10. Install the hydraulic cylinder to the closeout panel in the rear storage compartment.
11. Apply LOCTITE(TM) Blue, GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the bolts.
12. Position the link conduit (2) to the link. Install the link conduit screws (1).
Tighten the screws to 6 N.m (53 lb in).
13. Align the P-clips to the grease marks on the hydraulic cylinder hoses and the electrical wires.
14. Apply LOCTITE(TM) Blue, GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the bolts.
15. Install the P-clip screws (1) that attach the hoses and the wires to the link.
Tighten the screws to 6 N.m (53 lb in).
16. Install the rear compartment lid.
17. Install the rear storage compartment panel.
18. Install the position switch to the storage compartment closeout panel.
19. Install the side compartment trim.
