XLR V8-4.6L VIN A (2006)
6. Remove the upper and lower nuts retaining the steering column to the steering column bracket. Carefully rest the steering column on the I/P lower
support beam.
7. Remove the upper and lower nuts retaining the steering column to the steering column bracket.
8. Remove the accelerator pedal assembly with the accelerator pedal position sensor.
9. Disconnect the brake master cylinder push rod from the brake pedal.
10. Remove the brake booster mounting nuts.
11. Remove the mounting bolts from the cruise control release switch bracket.
12. Reposition the cruise control release switch and the bracket.
13. Disconnect the master cylinder push rod from the clutch pedal.
Important: The following step assures proper trim fit during installation.
14. Mark the location of the steering column bracket.
15. Remove the bolts which secure the steering column bracket to the I/P lower support beam.
