chevrolet Workshop Repair Guides

Chevrolet Astro Van V6-43L VIN W Workshop Service and Repair Manuals

Driver or Passenger Seat Back Cushion Frame Replacement|Page 10095 > < Driver or Passenger Seat Back Cushion Frame Replacement|Page 10093
Page 1
background image

Seat Back: Service and Repair
Front Seat Back Cushion Hinge Replacement (YC7)

Front Seat Back Cushion Hinge Replacement (YC7)

Removal Procedure

1. Remove the bucket seat from the seat riser. Refer to Bucket Seat Replacement   (See: Service and Repair/Bucket Seat Replacement).
2. Remove the armrest from the same side of the seat as the hinge. Refer to Armrest Replacement (YC6)   (See: Interior Moulding / Trim/Arm

Rest/Service and Repair/Armrest Replacement (YC6))Armrest Replacement (YC7)   (See: Interior Moulding / Trim/Arm Rest/Service and
Repair/Armrest Replacement (YC7)).

3. Remove the J-hooks that retains the carpet on the seat back cushion and to the corners of the seat cushion cover.
4. Remove the seat cover and pad. Refer toSeat Back Cover and Pad Replacement (YC5 and YC6)   (See: Seat Back Cover and Pad Replacement

(YC5 and YC6))Seat Back Cover and Pad Replacement (YC7)   (See: Seat Back Cover and Pad Replacement (YC7)).

Important:  Note the position and length of all the bolts removed. This will assist with reassembly.

5. Remove the bolts that retain the seat back hinges to the seat cushion and the seat back frame.

Important:  Handle the seat carefully when just one side of the seat back is attached to the seat cushion. Improper handling may damage
the seat back hinge or the lumbar support cable.

6. Remove the seat back hinges from the seat frame.

Installation Procedure

1. Install the seat back hinges to the seat frame.

Notice:  Refer to Fastener Notice in Cautions and Notices.

2. Install the bolts that retain the seat back hinges to the seat back frame and to the seat cushion frame.

  Tighten the bolts that retain the seat back hinges to the seat back frame and the seat cushion frame to 30 Nm (22  lb.ft.).

3. Install the bolts in the locations noted during disassembly.
4. Install seat cover and pad. Refer to Seat Back Cover and Pad Replacement (YC5 and YC6)   (See: Seat Back Cover and Pad Replacement (YC5

and YC6))Seat Back Cover and Pad Replacement (YC7)   (See: Seat Back Cover and Pad Replacement (YC7)).

5. Install the J-hooks that retain the carpet to the seat back and to seat cushion frame and to the corners of the seat cushion cover.

Driver or Passenger Seat Back Cushion Frame Replacement|Page 10095 > < Driver or Passenger Seat Back Cushion Frame Replacement|Page 10093