Astro Van 2WD V6-4.3L VIN W (2001)
Important: Use care when applying the prep (clear#1) on the window. This primer dries almost instantly and may stain the viewing area
of the window if not applied evenly.
20. Use a new dauber in order to apply glass prep (clear#1) to the area approximately 10-16mm (3/8-5/8in) around the entire perimeter of the
window inner surface.
21. Apply a second coat of the glass prep number (clear#1) to the same area of the glass.
22. Wipe the glass primed area immediately with a clean, lint-free cloth.
23. Shake the glass primer (black#2) for at least one minute.
24. Use a new dauber in order to apply the glass primer (black#2) to the same areas that glass prep (clear#1) was applied(2).
The glass primer (black#2) is good up to 8 hours after applying it to the glass. The primed surface of the glass must be kept clean.
25. Allow the glass primer to dry for approximately 10 minutes.
26. If using the short method, of cut the tip of the nozzle to provide an adhesive bead of 6.0mm (1/4in).
27. If using the extended method, cut the tip to provide an adhesive bead of approximately 10.5mm (0.14in) wide and 10.5mm (0.14in) high.
