Avalanche 1500 2WD V8-5.3L (2008)
11. Remove the fuel line bracket bolt (3).
12. Disconnect the chassis EVAP line quick connect fitting (4) from the fuel tank line.
13. Disconnect the fuel tank fuel feed line quick connect fitting (5) from the chassis line.
14. Cap the fuel and EVAP lines in order to prevent possible fuel and/or EVAP system contamination.
15. Remove the fuel/EVAP line clips from the frame and crossmember.
16. Remove the fuel line bracket locator tab from the frame.
17. Remove the fuel/EVAP lines from the vehicle.
Installation Procedure
1. Install the fuel/EVAP lines to the vehicle.
2. Install the fuel line bracket locator tab to the frame.
3. Install the fuel/EVAP line clips to the frame and crossmember.
Notice: Refer to Fastener Notice.
4. Install the fuel line bracket bolt (3).
