Avalanche 2500 4WD V8-8.1L VIN G (2003)
2. Install the valve rocker arm cover.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
Valve Rocker Arm Cover Bolts Torque Sequence - Right
3. Tighten the valve rocker arm cover bolts in sequence using two passes as shown.
3.1.
Tighten the bolts a first pass to 6 Nm (53 inch lbs.).
3.
2.
Tighten the bolts a final pass to 12 Nm(106 inch lbs.).
4. Install the spark plug wires to the ignition coils.