Blazer 4WD V6-4.3L VIN X (2005)
2. Install the actuator rod (2) to the mode door lever (3).
3. Install the actuator rod retaining clip (4).
4. Connect the vacuum connectors (1) to the mode actuator (5).
5. Install the right side driver knee bolster bracket (2) to the steering column bracket (1) and the intermediate bracket (3).
-
Tighten the knee bolster bracket mounting nuts (5) to 5.5 N.m (49 lb in).
-
Tighten the intermediate bracket mounting bolts (4) to 10 N.m (88 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
6. Install the knee bolster.
