C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the evaporator tube nut to the condenser.
Tighten
Tighten the nut to 20 N.m (15 lb ft).
6. Coat the new O-ring seal with 525 viscosity refrigerant oil.
7. Install the new O-ring seal.
8. Install the evaporator tube to the evaporator.
9. Install the nut to the evaporator.
Tighten
Tighten the nut to 20 N.m (15 lb ft).
10. Install the grille.
11. Install the coolant recovery reservoir.
12. Evacuate and recharge the system. Refer to Refrigerant Recovery and Recharging.
13. Leak test the fittings of the component using the J 39400-A.
