C 3500 Truck 2WD V8-6.0L VIN U (2001)
Radiator Hose: Service and Repair
Radiator Vent Inlet Hose Replacement
Radiator Vent Inlet Hose Replacement
Removal Procedure
1. Drain the cooling system.
2. If necessary, remove the engine sight shield.
3. Remove the radiator vent inlet hose from the radiator inlet hose clips.
4. Reposition the vent inlet hose clamp at the throttle body.
5. Remove the vent inlet hose from the throttle body.
6. Remove the vent inlet hose clip at the fan shroud.
7. Reposition the vent inlet hose clamp at the radiator.
8. If equipped with Regular Production Option (RPO) C36 (auxiliary heater), remove the vent inlet hose from the radiator.
9. If equipped without RPO C36 (auxiliary heater), remove the vent inlet hose from the radiator.
