Camaro V8-305 5.0L VIN E TBI (1989)
19.
Install screws (7, Fig. 3) to secure No. 1 bow garnish molding retaining bracket (8, Fig. 3) to No. 1 bow garnish molding (1, Fig. 3).
20.
Install new latch handle assembly (3, Fig. 3) to top bow (6, Fig. 3) first installing two shims per side (from step 14) between latch handle
assembly and No. 1 bow. If assembly includes more than two shims per side, eliminate extra shims.
21.
Secure latches with new screws (2, Fig. 3) provided in kit.
NOTICE:
When installing latch handle screws, apply Locktite or equivalent to screw threads.
22.
Raise and latch top to windshield header.
23.
Push each latch handle up to into stowed position.
24.
Check each latch handle to insure it will not rotate backward when in stowed position.
25.
Install Campaign Identification Label.
Label and Claim Information
CAMPAIGN IDENTIFICATION LABEL
Each vehicle corrected in accordance with the instructions outlined in this bulletin will require a "Campaign Identification Label". Each label provides a
space to include the five (5) digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or a ball
point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner.
Apply "Campaign Identification Label" only on a clean, dry surface.
CLAIM INFORMATION
Submit a Product Campaign Claim with the information indicated below:
Dealers will automatically receive the correct labor and material allowance based on the labor operation performed.
Refer to the Chevrolet Claims Processing Manual for details on Product Campaign Claim Submission.
Owner Letter
January 24, 1990
