Camaro V8-5.7L VIN G (1998)
Blower Motor Switch: Service and Repair
HVAC Control
HVAC Control Connectors
HVAC Vacuum Connector
Remove or Disconnect
1. Accessory trim plate.
^
Pull accessory trim plate rearward and off instrument panel lower trim pad.
2. HVAC control bolts.
3. HVAC control.
^
Pull control out far enough to reach the vacuum, electrical and temperature control cable connections.
4. HVAC mode switch connector (1).
5. HVAC control illumination connector (2).
6. Blower motor switch connector (3).
7. Vacuum harness connector from vacuum selector valve.
8. Temperature control cable from control (5).
^
While releasing temperature control cable clips from control, pry temperature control cable with small screwdriver from control.
9. Rear defogger switch connector (4).