Camaro V8-6.2L (2010)
6. Install the exhaust heat shield (2) and the exhaust heat shield fastener (1), then tighten to 3 Nm (27 lb in).
7. Install the exhaust heat shield (4) and the exhaust heat shield fasteners (3), then tighten to 6 Nm (53 lb in).
8. Connect the fuel feed connector (1) and the evaporative emission connector (2). Refer to Metal Collar Quick Connect Fitting Service (See: Fuel
Line Coupler/Service and Repair/Metal Collar Quick Connect Fitting Service) and Plastic Collar Quick Connect Fitting Service (See: Fuel Line
Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
9. Inspect for leaks using the following procedure:
1. Turn ON the ignition, with the engine OFF for 2 seconds.
2. Turn OFF the ignition, for 10 seconds.
3. Turn ON the ignition, with the engine OFF.
4. Inspect for fuel leaks.
