Camaro V8-6.2L (2010)
Fuel Supply Line: Service and Repair
Fuel Line - Chassis
Fuel Line Replacement - Chassis
Removal Procedure
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (See: Fuel Filter/Fuel Pressure Release/Service and Repair).
2. Disconnect the fuel feed connector (1) and the evaporative emission connector (2). Refer to Metal Collar Quick Connect Fitting Service (See:
Fuel Line Coupler/Service and Repair/Metal Collar Quick Connect Fitting Service) and Plastic Collar Quick Connect Fitting Service (See: Fuel
Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
4. Remove the exhaust heat shield fasteners (3) and the exhaust heat shield (4).
5. Remove the exhaust heat shield fastener (1) and the exhaust heat shield (2).
