Camaro V8-6.2L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the fuel rail to intake manifold retaining bolts (1) and tighten to 10 Nm (89 lb in).
6. Install the fuel rail ground strap to intake manifold retaining bolt (2) and tighten to 10 Nm (89 lb in).
Note: Do not damage the engine wiring harness.
Note: Observe the order sequence of the fuel injector electrical connectors (1).
7. Connect the fuel injector electrical connectors (1) to the fuel injectors.
8. Install the engine wiring electrical harness to the fuel rail.
9. Connect the fuel feed pipe to the fuel rail. Refer to Fuel Line Replacement - Engine (See: Fuel Supply Line/Service and Repair/Fuel Line
Replacement - Engine).
10. Connect the negative battery cable.
11. Inspect for leaks.
1. Turn ON the ignition for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition.
4. Inspect for fuel leaks.
12. Install the engine cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement).
