Camaro V8-6.2L (2010)
23. Remove the lower control arm to subframe retaining bolt (1) and nut (5).
Discard the nut.
24. Remove the lower control arm (4) from the subframe (3).
25. Remove the upper control arm pivot bushing. Refer to Rear Suspension Upper Control Arm Bushing Replacement (See: Control Arm/Control
Arm Bushing/Service and Repair/Rear Suspension).
Note: Fasteners with thread sealant must be replaced after removal.
26. Remove the upper control arm ball joint to subframe retaining bolt (1) and nut (5).
Discard the nut.
