chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Adding Fluid to Fill DRY Transmission & Converter|Page 1290 > < Fluid - A/T|Capacity Specifications|Page 1287
Page 1
background image

Fluid - A/T: Service and Repair
Adding Fluid to Fill DRY Transmission & Converter

1. Add fluid through filler tube until oil level is between add and hot marks on dipstick.
2. Place selector lever in park, depress accelerator to place carburetor on fast idle cam, and move selector lever through each range. Do not race

engine.

3. With selector lever in park, engine running at idle (1-3 minutes), and vehicle on level surface, check fluid level and add additional fluid to bring

level between dimples on dipstick.

Adding Fluid to Fill DRY Transmission & Converter|Page 1290 > < Fluid - A/T|Capacity Specifications|Page 1287