chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Channel Plate, A/T > < 3T40 Automatic Transaxle|Page 6106
Page 7
background image

20. Install the left splash shield.
21. Install the left wheel and tire assembly. Refer to Wheel Installation in Tires and Wheels.
22. Lower the vehicle.
23. Install the air cleaner assembly.

24. Remove the J 28467-360 from the transmission.
25. Connect the negative battery cable.

^

Tighten the bolt to 16 Nm (12 ft. lbs.).

26. Add transmission fluid.
27. Apply the brakes. Start the engine. Shift the transmission from R (Reverse) to D (Drive).
28. Install the transmission mount pipe expansion bolt. Refer to the appropriate procedure:

^

AT Mount Replacement (Front)

^

AT Mount Replacement (Rear)

^

AT Mount Replacement (Side)

29. Inspect the oil level.

Channel Plate, A/T > < 3T40 Automatic Transaxle|Page 6106