Cobalt L4-2.0L SC VIN P (2005)
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement - Front
Park Brake Cable Replacement - Front
Removal Procedure
1. Remove the front floor console storage compartment.
2. With park brake lever in the released position, using ONLY HAND TOOLS, remove the park brake cable adjusting nut and washer.
3. Release the rear park brake cable ends from the cable equalizer on the front cable.
4. Remove the front park brake cable from the park brake lever by pulling the cable rearward.
Installation Procedure
1. Install the front park brake cable to the park brake lever.
2. Install the rear cable ends to the cable equalizer.
