Cobalt L4-2.0L SC VIN P (2005)
10. Remove the caps or plugs from the fuel pipe and the engine fuel rail.
11. Connect the fuel feed pipe to the engine fuel rail.
12. Install the pipe retaining clip (1) to the fuel feed pipe.
13. Connect the negative battery cable.
14. Inspect for fuel leaks using the following procedure:
1. Turn ON the ignition, with the engine OFF for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition, with the engine OFF.
4. Inspect for fuel leaks.
