Cobalt L4-2.4L (2007)
1. Put a light coat of grease from service kit on the ball grooves of the inner race and the outer race.
2. Hold the inner race 90 degrees to the centerline of the cage with the lands of the inner race (1) aligned with the windows of cage (2).
3. Insert the inner race into the cage.
4. Hold the cage and the inner race 90 degrees to the centerline of the outer race. Align the cage windows (3) with the lands of the outer race (2).
Important: Ensure that the inner race is oriented the same as prior to disassembly. Use the reference mark placed earlier.
5. Install the cage and the inner race into outer race.