Corvette V8-5.7L VIN G (1997)
20. Remove the P/S gear mounting bolts and nuts.
21. Release the P/S gear and cooler from the front suspension crossmember, then slave forward.
22. Remove the A/C compressor bracket.
23. Remove the generator from the accessory mounting bracket.
24. Install and support the engine with the J 41803.
25. Remove the RH engine mount (with bracket).
26. Remove the TOC front pipe front clip.
27. Raise the vehicle.
28. Remove the TOC front pipe front retaining clamp bolt and retaining clamp.
