Corvette V8-5.7L VIN G (1997)
14. Install the P/S cooler retaining bolts.
-
Tighten the power steering cooler retaining bolts to 11 Nm (97 inch lbs.).
15. Connect the intermediate shaft lower coupling to the power steering gear.
16. Install the intermediate shaft lower coupling bolt.
-
Tighten the intermediate shaft lower coupling bolt to 34 Nm (25 ft. lbs.).
17. Install the intermediate shaft lower coupling shield.
18. Carefully pivot the A/C condenser and the radiator back into position.
19. Install the air intake shroud and the air cleaner housing.
20. Connect the inlet and outlet radiator hoses to the radiator.
21. Connect the inlet and outlet radiator hose clamps to the radiator.
22. Install the upper radiator support and the air intake duct.
23. Flush the TOC and TOC pipes.
24. HAND-START and HAND-TIGHTEN the TOC front lower pipe fitting to the radiator.
-
Tighten the transmission oil cooler front lower pipe fitting to the radiator to 27 Nm (20 ft. lbs.).
