Corvette V8-5.7L VIN G (1997)
13. Grasp the cable end and pull rearward in order to unlock the cable from the shifter pivot arm stud, then reposition the cable.
14. Remove the nuts retaining the shift control to the driveline tunnel.
15. Shift the floor shift control into FIRST. This will lengthen the shift control cable and provide slightly more movement.
Important: DO NOT lift the floor shift control any more than necessary, the shift control cable is extremely rigid.
16. Slowly lift the floor shift control just enough to access the shift control cable end. BE SURE the floor shift control remains in FIRST.
17. Unsnap the shift control cable end clip from the floor shift control arm stud. Use care to not suddenly jerk either the cable or the floor shift control.
18. Remove the floor shift control.
