Corvette V8-5.7L VIN G (1997)
Hydraulic Hose: Service and Repair
Hydraulic Hose Replacement (Clutch Actuator Cylinder)
REMOVAL PROCEDURE
1. Remove the clutch actuator cylinder.
2. Use a small drift or punch to remove the roll-pin retaining the hydraulic hose to the actuator cylinder.
3. Remove the hydraulic hose from the actuator cylinder.
4. Drain off the excess fluid from the actuator cylinder into a container.
INSTALLATION PROCEDURE
1. Install the new clutch actuator cylinder hose to the clutch actuator cylinder. Check the new O-ring seal for proper placement on the actuator
cylinder hose.
2. Install the actuator cylinder hose roll-pin retainer using a small drift or punch.
3. Rotate the actuator cylinder hose to ensure freedom of movement.
4. Install the clutch actuator cylinder.
