Corvette V8-5.7L VIN G (1997)
Pilot Bearing: Service and Repair
REMOVAL PROCEDURE
NOTICE: DO NOT use grease under pressure to force the pilot bearing from the crankshaft or engine damage may result.
^
Tools Required:
-
J 23907 Clutch Pilot Bearing Remover
1. Remove the clutch pressure plate and clutch driven plate.
2. Using the J 23907, remove the clutch pilot bearing.
INSTALLATION PROCEDURE
1. Using a suitable size socket, install the clutch pilot bearing.
2. Install the clutch pressure plate and clutch driven plate.