Corvette V8-5.7L VIN G (1997)
9. Install the transaxle mount to rear suspension crossmember nuts.
-
Tighten the transaxle mount to rear suspension crossmember nuts to 50 Nm (37 ft. lbs.).
10. Install the rear leaf spring.
11. Remove the tie-off retainers from the electronic brake and traction control module (EBTCM).
12. Align and install the EBTCM to the insulator attached to the EBTCM RH mounting bracket.
13. Install the EBTCM LH mounting bracket into position.
14. Align and install the insulators attached to the EBTCM LH mounting bracket to the EBTCM.
